|
Canadian Ludlow Mfg Ltd - List 90
Hydrant is identical to Ludlow Valve Mfg. Co List 90 Stuffing Box Hydrant
All pictures Copyright © 1999 "Toronto Resident"
See Also List 90-0 and List 75-0 Information
|
|
These are the main components in the stuffing box of the hydrant. The very
top item is the umbrella operating nut. Directly below that is the dome.
Below the dome, is the packing gland or follower (smaller red part) that is attached
by the two follower bolts. The packing gland/follower slides down into the packing plate which is
attached to the head of the hydrant. Below the packing plate is the seal which goes between the
packing plate and the hydrant head. Behind the seal is the bronze sleeve that the
stem slides into.
Click on image for higher resolution image
|
Below are images illustrating the hydrant after taking the umbrella operating nut and dome off the hydrant.
In picture to the left, the elliptical shaped part in the center is the packing gland or follower. The four
packing plate hold down bolts are visible. To the right is a side view of the same parts. The packing gland/follower is bolted into the packing plate.
Back to Hydrant Technical Information
More Ludlow hydrant images
Unless otherwise noted, all contents of these WWW pages © 1996-99, FireHydrant.org
This site designed and maintained by JikTek
|